Run a nozzle check first
Every inkjet printer can print a test pattern from its menu or its app (often under Maintenance). A gap or a missing colour in the pattern shows which nozzles are blocked, and it tells you whether a clean is needed at all.
Run a head clean, by brand
- Epson: Maintenance › Print Head Cleaning on the printer, or Epson Printer Utility on a computer. Epson: print head cleaning (EcoTank).
- Canon PIXMA: Maintenance › Cleaning, then Deep Cleaning if a normal clean does not help. Canon: cleaning (TS3100 series), deep cleaning.
- HP: in the HP Smart app or the printer’s Tools menu, choose Clean Printhead. HP: print quality (DeskJet 2600, 2700, 4100, 4800), DeskJet 2800, 4200, 4900.
- Brother inkjet: the Ink or Maintenance menu on the control panel, then Cleaning. Brother: clean the print head (DCP-J1050DW / MFC-J1010DW).
Print the nozzle check again after each clean.
When the cartridge is the cause
- The protective tape or orange cap is still on a new cartridge.
- The cartridge is empty, or the printer shows it as not recognised.
- The cartridge is the wrong code for the printer. Not sure of your model? Search for your printer in the search box at the top of this page, or read what ink does my printer use?
When to stop cleaning
Each clean uses ink. If two or three cleans do not improve the nozzle check, leave the printer for a few hours so the cleaning fluid can soften dried ink, then try once more. If it is still blank, the cartridge or the print head may be faulty. If a cartridge you bought from us is faulty or still is not recognised after these checks, contact us and see our returns policy.
HP DesignJet print heads
Wide-format HP DesignJet printers use separate print heads, and each head prints two colours. The head’s HP part number is on its label; quote it when you contact us so we match the exact head.