Remove every protective part
Brother cartridges ship with an orange protective part or cap and, on some, a seal. Take the cartridge out and check all of them are gone.
Reseat the cartridge
- Open the ink cartridge cover.
- Push the lock release lever and take the cartridge out.
- Put it back in the slot that matches its colour label and push until it locks with a click.
- Close the cover and wait for the printer to check the cartridges.
Brother’s steps: Cannot Detect (MFC-J1010DW), Cannot Detect Ink Volume (DCP-J1050DW), or your model on Brother NZ support.
Check the cartridge code
Checked against Brother New Zealand. Each printer name opens the cartridges we list for it.
When a compatible cartridge is not detected
Reseat it once more and check its code. If a cartridge you bought from us is faulty or still is not recognised after these checks, contact us and see our returns policy. Not sure whether to buy genuine or compatible? Genuine vs compatible, explained.